Print a Skirt and Nozzle Holder the appropriate size for your printer. The A and B variants are mirrored for installation on opposite sides of the printer.
Install the 2 heat-set inserts into the ends of nozzle-holder part.
Install 1 magnet in the skirt, and one in the nozzle-holder such that they attract eachother when the door is installed.
Insert the door into the skirt part and fasten with 2 M3x8 BHCS
Remove the stock skirt piece and install the new one in it's place.
The most recent version of this mod can always be found on Github
Maple Leaf Makers
