Remix for doing a Multi-colour print and a custom fit on Mastercraft calipers

This g-code file is specific to a Prusa Mini/Mini+

If you are printing in Orange with Black text then you'll need to:

1. Start with Orange filament loaded on your Prusa Mini/Mini+
2. About 8 minutes after starting your print from the g-code file, you will be prompted to change filament (i.e. Black in my example).
3. The text only prints for 2 layers, so you'll be prompted to change filament again in about 1 minute (i.e. back to Orange).
4. The remainder of the print will now be done in orange and takes about an hour.