Spring lock carabiner

Spring lock carabiner

Typical climbing carabiner to customize with your favorite colors. Model with retention spring lock

Note: Do not use for climbing

The model has been projected with catia V5

The spring piece “molla” must be printed with PETG for it to work properly.

Print the “blocador_molla” in the correct position.

Assembly:

To disassemble this assembly, push “blocador_molla” in the same direction as assembly

Finally, mount the pin “passador”

A little force must be exerted to mount the pin. It’s printed with a slight interference so that it sticks to the door “tanca_molla”, it rotates freely on the “cos” piece.

The piece “tanca_molla” , “molla” and “blocador_molla” must be assembled before placing the pin.

Combine colors and personalize with your name ....