Valheim Ward Light

I remixed this to make a version that was cut out on the inside to allow for light to show through for a glow effect.

The cut out is sized for a mini teat light (30mm dia x 25mm high) but could be re-scaled for different size lights.

Recommend to use 20% or more infill to help block the light in the areas where it is not intended to shine through. That seemed to work well with black filament, lighter colors may need more.

I currently do not have any wood filament, but I would really like to see how that would look. Once I get through one of my other spools of filament I will have the capacity to pick a wood one up.

The right eye is much dimmer in real life, not sure why the photo came out that way.

Update:

The black models were printed with an Ender 3 v2, 0.4mm nozzle @ 0.20mm layer height.

The wooden model was printed on a Prusa MK4, 0.6mm nozzle @ 0.32mm layer height.

I corrected the seam placement in the gcode files I uploaded to not have the seam on the front of Odin's face, like in the wooden filament photos.