MK4 Tool Holder

I like to keep all the tools that come with the printer near each printer, so I'm not scrambling to find them when in need of them. 

This holder has been designed for the tools that come with the Original Prusa MK4, and some additional tools that I keep near the printers that are used frequently.

The g-codes below have been sliced with the MK4 profile (w/PrusamentPLA Galaxy Black supplied with the assembled MK4), so if you need them sliced for another printer profile use the attached .stl or .3mf files uploaded. I have also attached the .f3d file if you'd like to add text or logos, or just get creative with it! Printed only with two small support enforcers near the gravity feed slot for the alcohol swabs. (these alcohol swabs, are found in the pharmacy, I get mine from Wal-Mart)

I  have attached a spatula file below that sits nicely in the tool holder also. The spatula was printed with 4 perimeters, 5 top/bottom at .10 layer height with 30% gyriod infill (probably could have gotten away with less)

The X-Axis motor passes close to the tool holder, but I haven't ran into any issues yet. I will update the model if I run into an issue.

The Tool Holder attaches to the frame of the MK4 with 2 - M3x18mm screws (if you're like me and have upgraded MK3's you should have these on hand, if not a local trip to the hardware store is needed)

Hope you like it!

Take Care,
Darrell