X500 Quad Drone Lower Leg connector

This is a replacement for the lower leg joined for a X-500 style quad drone.

This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit).

It will fit any X-500 drone that uses 16mm (OD) down tube for leg and 10mm (OD) horizontal tube for foot.

Best way to print is flat face down (see image), 0.2 layer height, 40% gyroid infill and use organic supports.

Original part weights 5.6 gr. and the PLA part with the above print specs weights 8.2 gr. with all required hardware.

Required Hardware:

• 4 x 3 mm 18 or 20 mm long cap bolts.
• 4 x 3 mm nuts.
• 4 x 3 mm washers (7mm OD).

Enjoy!