Gridfinity Hex Bit Holders with Larger Hex Holes

Other hex bit holders that I have tried were too small for all my miscellaneous bit's widths, so I have made better holders. These models are for hex bit holders which have larger 6.6 mm, 6.7 mm, 6.8 mm, and 6.9 mm hex bit cutouts. I am including a few versions; 1x1, 1x2, 1x3, 1x4, 2x2, and 2x4. Options for plain or magnet bottom using 6mm x 2mm the standard gridfinity sized magnet.  

NOTICE: 

• You printer's setting might ever so slightly print at a different size. Since these bins only differ by .1mm, make sure to print the tester first. Unless you love living life on the edge, then you be you, and roll the dice on a size. 
• Included are two hex hole testers. One is an actual bin, the other is a quicker template. Each has increasing diameters for the hex holes. You can check to see if these will fit, and what size you need. 
• Drop me a note if you need another size.

Updates:

• 2025.01.07 - Added a few sample 6.8 mm taller versions with magnet bottoms
• 2024.03.09 - Added 6.8 mm and 6.9 mm models with magnet bottoms
• 2024.03.08 - Added 6.7 mm models with magnet bottoms
• 2024.03.04 - Added 6.6 mm models with magnet bottoms
• 2024.01.28 - Added 6.8 mm models with plain bottom and label space
• 2024.01.28 - Added 6.9 mm models
• 2024.01.16 - Added 6.8 mm models
• 2024.01.13 - Added the mini tester
• 2024.01.12 - Added 6.7 mm models
• 2023.01.03 - Added the hex hole tester
• 2023.11.15 - Added 1x4 6.6 mm model
• 2023.05.10 - Added 2x2 and 1x3 6.6 mm, Added STLs