Bearing Upgrade (Coin Rotator)

This bearing upgrade provides:

• more stability for higher stacks (lesser tilt)
• more stability for unequal coin levels
• way more easy rotating

What you need to purchase:

• 1x bearing 608-2RS

Printing:

• 1x Coin_Rotator_Base2_Bearing [replaces Coin_Rotator_Base2]
• 1x Coin_Rotator_Spacer_Bearing [replaces Coin_Rotator_Spacer]

I've printed the Coin_Rotator_Distancer_Bearing with 0.1mm layer height, 200°/60° PLA and tree support for the bearing shaft. See also slicer picture.

Coin_Rotator_Base_Bearing was printed with 0.16mm layer height and without supports.

Mounting order:

• [1] screw Coin_Rotator_Spacer_Bearing onto existing base plate
• [2] press bearing onto [1]
• press Coin_Rotator_Base2_Bearing onto [2]

Works for all my Coin Rotators:

• [€] https://www.printables.com/de/model/422240-coin-rotator-eur-printed-only
• [$] https://www.printables.com/de/model/440248-coin-rotator-printed-only
• [£] https://www.printables.com/de/model/441085-coin-rotator-ps-printed-only
• [¥] https://www.printables.com/de/model/441339-coin-rotator-y-printed-only
• [R$] https://www.printables.com/de/model/450858-coin-rotator-r-printed-only