Mesh fan grills & fan support, Voron V2 & VT

Middle Fan Support with mesh

The mesh parts are made to snap in, but i added a tiny drop of CA-glue on the backside in some spots to make sure they stay in place.

Print the mesh with 0 bottom/top layers, 2 perimeters & 20% honeycomb infill. You will most likely need to tweak the infill angle to make the "points" of the hexagons point upwards (usually 0 or 90 degrees). (I also found that the side printed downwards/towards the texuted PEI gave the best look on the fan mesh/black).

For a reference to how to do the mesh part look at Eddies clip from 6:20. 

- - - 

In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!