Voron Trident mesh skirts

Trident r1 Skirts with mesh

CHANGELOG

• 16.04.2023: I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made.
• 16.04.2023: Initial release.

Regarding the middle fans you can use this.

!!Caution!!

- The two "parts" of each skirt segment are meant to be printed TOGETHER!

- For a reference to how this works, take a look at Eddies video from about 4:54.

- I've had some issues laying down the second/top-part on to the "meshed" first/lower-part if I run on my stock print & cooling settings, so to mitigate this I inserted some extra code (in my slicer) at the start and end of layer 4 (the first layer of the second/top-part start):

Layer 4 start:

M220 S50    ; Speed factor override percentage

Layer 5 start:

M220 S100    ; Speed factor override percentage

I've also set my filmaent cooling Disable fan for the first X layers to 4 so that the part cooling don't start up before the second/top-part has it's first layer put down.

- - -

In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!