2" x 5.5" Bracket

90 Degree joints, 5.5" inches in width, and 0.25" in height made with a hex pattern to save material. Intended design and used for a Desk that I'm currently building. Could be used in any structure with wood that is 5 ½ inches and or bigger in width, I guess. Print settings 0.2 LH with 15% Infill, No supports again. Recommended print vertically for strength in layer lines. Add bed adhesion if you go this route! First time designer post and I made this a few months ago and revised it a few times. Tell me what you think 3d printing world?