April 19, 2023
Description
Print this model as is with supports. I ended up using a brim on mine to keep the edges down during print. It's designed to fit this charger: https://www.amazon.com/Apple-MHXH3AM-A-MagSafe-Charger/dp/B08L5NP6NG/ref=asc_df_B08L5NP6NG/?tag=hyprod-20&linkCode=df0&hvadid=475856277502&hvpos=&hvnetw=g&hvrand=12152792831084004783&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032911&hvtargid=pla-1029965818057&psc=1.
When done, it should slip into the slot in the center, with the charging cable going through and coming out the bottom. There's a pocket on the underside that allows you to coil the excess cable and keep it tucked away.
License:
Creative Commons — Attribution