Universal GoPro Mount (No Supports)

Useful to mount any accessory that has a standard GoPro connection to a bike, stroller or scooter handlebar, or any kind of bar, rod or stick.

Parts needed

• 3D printed:

- 1 x Top

- 1 x Bottom

- 2 x TPU Pads (optional)

• Not 3D printed:

- A pair of GoPro screws, like the ones in the photo.

- If you don't have those GoPro screws, don't worry! You can use any normal M5 nuts and bolts.

Assembly

Extremely simple, just glue the TPU Pads to the Top and Bottom parts as you can see on the photos, then put in place one nut and bolt on the side that the hole is closed, position the whole assembly in place and finally screw the remaining nut and bolt.

Printing

Nothing special here. The parts are already on the optimal printing orientation. NO SUPPORTS  needed. The Top and Bottom parts can be printed in any material you want, I printed it in PETG. The TPU Pads, as the name suggests, should be printed with TPU or any other flexible material, but don't worry, these are optional to print as they only assure a better grip.

If for some reason you need more strength, you can rotate the parts 90º on the slicer so one of the side faces is in contact with the print bed, but in this case you will need supports.