Customizable Earring Stand

This is an earring stand for longer earrings. The stand was designed by a friend in Freehand and I just linear extruded them in openScad.

You can customize the lenght of the hangers if you want them shorter, or can print them longer. Also you can adjust the spacing between the holes and the radius of the holes.

Instructionsstand.stl

Print stand.stl two times.

Print hanger.stl three times, or 3x_hangers.stl once.

Then just plug the hangers into the stands and you are done.

Custom Section

Changelog

3.10.2015:

Updated list image

Category: Earrings