Fanatec Streamdeck mount

A very rigid Streamdeck MK2 mount for a Fanatec wheelbase.

Tested with a CSL DD, but any Fanatec wheelbase with T-nut mounting slots on the side should work. 

Additional parts needed:

• 3x M4xL4xD6 knurled nut insert
• 3x M4x12 bolt (a little longer is also possible)
• 4x M3xL4xD4 knurled nut insert
• 4x M3x5 or M3x6 bolt
• 2x M6 T-nut (included with the Fanatec wheelbase)
• 2x M6x20 bolt (included with the Fanatec wheelbase)

Instructions:

1. Use a soldering iron to melt the inserts in the appropriate holes. The M4 inserts are meant to go between the StreamdeckMount part and the WheelbaseMount part. The M3 inserts are meant to go into the StreamdeckMount part, for the Cover part.
2. Use the M4 bolts to screw the StreamdeckMount part to the WheelbaseMount part.
3. Use the M3 bolts to screw the Cover part to the StreamdeckMount part. No need to insert the Streamdeck itself yet.
4. Use the T-nuts and M6 bolts that Fanatec includes with the wheelbase to mount the assembly to the wheelbase.
5. To mount the Streamdeck, no need to unscrew the four M3 bolts. Just bend the top a little bit and slide the Streamdeck in.

Printing instructions:

• No need to use supports if you print it like shown on the picture.

I hope you enjoy the model!