mini DCDC enclosure

This is an enclosure for mini dcdc converter. I had this https://www.amazon.de/YOUMILE-Netzteil-12-24V-Spannungsabw%C3%A4rtswandler-Einstellbar/dp/B07TTH6C3J but theire are same boards from other sellers available. So check out the reference picture provided here …

additional hardware

• some small piece of 15x4 holes stripe board pcb
• 2 screw terminals
• the dcdc obviously
• 3x1 pin header

print instructions

• PLA good enough
• print in standing position
• ! use brim !

assembly

• solder board like shown in the picture.  Check polarity of connection carfully!
• perhaps a have to sand the pcb to fit into the enclosure
• put pcb into the enclosure
• snap the cover on it

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.