BMW e46 cap nut for engine cover

This is a nut for the engine cover as seen in the second image. It works for e46 316i,318i and 320i, possibly for other models that have the same nut.

Note: you will need an O-ring or rubber washer (⌀10mm) to prevent unscrewing due to the engine vibrations, the original nut has one too.

You'll need ABS filament or PET-G, PLA filament will break after a couple of months.

Print Settings

Printer Brand:

Artillery

Printer: 

Artillery Hornet

Rafts:

Yes

Supports: 

No

Resolution:

0.2

Infill: 

25

Filament: ABS or PET-G

Notes:

minimum 3 perimeter for Vertical shells

Category: Automotive