April 22, 2023
Description
WARNING: You must glue the two pieces together. ALWAYS wait for the glue to dry fully before using the body cap as the glue could potentially permanently fog your cameras sensor.
This is a nifty and beefy Sony body cap that fits on their mirrorless cameras. It features not only easy supportless printing but it locks with the locking pin and it very easy to remove if you have issues with your hands.
I suggest printing the key with 3 walls and random seam alignment other than that have fun and feel free to add your own modifications like logos or text to the grip face as I made sure there was room to be creative.
I may try and rework a design that doesn't use glue but I also didn't want to use a bunch of screws but this works as is.
License:
Creative Commons — Attribution — Noncommercial — Share Alike