May 26, 2023
Description
You need TPU to print this beautiful one piece musical instrument. Empirically tested to be a very good way to annoy your partner!
Print the holey side on the print bed. I recommend printing it with 100% infill or enough top layers to get the finger side sturdy and airtight. Don't worry, it will still only take about 12g of TPU.
I printed this with 0.6mm nozzle, but I'm sure 0.4mm works just as well. Might even be more flexible.
Place the holey side on your palm so you get a nice seal. Wet the palm for extra juiciness. Then squeeze the instrument with your fingers. Alternate angles, rotation, position, speed, energy and sensuality to make it rain! The instrument and your fingers might need some loosening first before you start getting nice sounds. Keep practicing and try different palm positions! #sharethefart
2023/04/26
Added The Pha®t Edition! The bigger, longer and thicker version for 57% more fun!
Depending on the size of your sausage shovels, this might be easier and sexier to play than the normal edition. Uses a bit more TPU of course (18,5g) but maybe it's worth it?
---
I happened to have a little video of how well the TPU bridges on top of the model (and this is even an extra super big version it is printing):
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Jaatinen
