Portafilter hangers
- Consider the temperature of the portafilter you hang, if you plan on hanging it straight from the coffee machine, you might not want to use PLA.
- You can put a small insert in between and below the hangers to prevent the handle from touching the wall. Print the hangers first, measure the gap, and print the appropriate insert. (I've used 25mm simple hooks for my Rocket handles)
Tamper holder
- The horizontal retention walls are tapered so they work with the filter baskets too
- Mirror the left part in your slicer to make the right part
Recommended Print Settings
- 0.4mm nozzle
- 0.2mm layer height
- 3 walls
- 3 bottom
- 4 top
- 30% triangular infill
- Print hot for good layer adhesion (the overhangs are easy on these models)
Enjoy!
If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.
KYZ Design
