SHOPVAC CAMLOCK VACUUM CUFF ADAPTER 50MM TO 40MM ID

DOWNLOAD CAMLOCK and find more accessories HERE.

This part will adapt a 40mm vacuum wand to the new CAMLOCK end.   It should be a slightly loose fit depending on the taper of your vacuum.   I use PFTE plumbers tape to ensure a perfect fit, but a smear of bathroom silicone will make a permanent connection.

Prints without supports.

I have printed in PLA 0.2mm QUALITY settings.  The print may be a little tight when first inserted into the Camlock fitting, that is by design as there is only 0.1mm clearance, but it will ease after a few insertions.