Prusa i3 3030 Extruded Aluminum Cover Caps - Full printer in one STL

Print this out in the color of your choice, and you will have enough covers for all of the extruded aluminum pieces on the Prusa i3 MK3S (and I think the MK3, 2(s), 2.5(s), etc?).

You will need to trim some of it for places where the channel is not clear the entire time.
Also helps to trim the corners of the insert at the edges.

This is the same cad as 8020 sells

Print instructions

Category: 3D Printer Accessories Summary

Print this out in the color of your choice, and you will have enough covers for all of the extruded aluminum pieces on the Prusa i3 MK3S (and I think the MK3, 2(s), 2.5(s), etc?).

You will need to trim some of it for places where the channel is not clear the entire time.
Also helps to trim the corners of the insert at the edges.

This is the same cad as 8020 sells

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: .2

Infill: 100

Filament: Any PETG Any
Notes:

Recommend 0.2 m layers for the base, and finer (0.1-0.15) for the upper.