Buzzer / big red button / emergency button (Grobhandtaster / Not-Aus)

BIG RED BUZZER / EMERGENCY BUTTON
(Grobhandtaster / Not-Aus)
I always wanted to have one of these "big red buttons".

Print instructions

Material:

For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I used yellow (Maisgelb) PETG from "Das Filament" and for the actual button part, I used some cheap red PLA.

The yellow and the black part a screwed together by using four M3x30mm bolts (I used only 2).

And as the switch I used a modified one, which I salvaged from an old PC (together with its two M3x10mm bolts).

A similar switch: "PWL-2P1TL-6SASHA Netzschalter, Druckschalter 250 V/AC 6A" (buy it here on eBay)

Post-Printing:

1. Modifying the switch to a momentary pushbutton:

You probably want to modify the switch, so it functions as a momentary pushbutton.
To do this (depending on your switch), you need to remove the metal bracket/wire.

2. Assembly:

1. Put in the pushbutton.
   
2. Connect it to your electronics.
   
3. Screw the two halfs together.
   
   

Notes:

Sliced files are working for my Ender 3.

If you need any other information (or other file types for customization), just contact me through a message.

(to get the SolidWorks2013 file, go to the Thingiverse page: https://www.thingiverse.com/thing:3771410)