Pooper Scooper Rake

The wife went out and bought one of these "Pooper Scooper Combos" and the darn thing was over $30!!! I thought that was an outrageous amount!!!

Anyways, here is my version of the "Rake". You print it flat, then using a coffee can (or other round can) you heat the tines for a bit and shape them around the metal can to achieve the round shape. The first one I made, I just used the dowel to shape the tine ends.

Speaking of dowels, you will need a 3/4" wood or metal dowel, (I used an old handle from a broom), to complete this project. The length of the dowel is entirely up to you, I adjusted mine so I don't have to bend over while using it.

A little bit of glue, to stick both ends on, and you'll be all set.

Print Settings

Printer Brand:

Tevo

Printer: 

Tarantula Pro

Rafts:

No

Supports: 

No

Resolution:

.25mm

Infill: 

50%

Filament: Inland Natural PLA+

Notes:

You can lower the infill for the "Handle" but the Rake Head really needs 50% or more.

Category: 3D Printing