April 27, 2023
Description
Modified version to allow easier access to the hotted with less disassembly. Also, the complexity of the print is drastically reduced and there is only a very minimal amount of support required.
Use two M3 x 10 countersunk screws to mount the fan bracket to the main body.
Support from the build plate only.
Just makes it easier to free up some space when working on the hot end. Also means you won't have to disturb your bowden tube to install the bracket the first time.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Whimsii3D
