Plant Climber Infinity Assembler + Wall Mount

⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop

So, I got a new plant for the stairway at home and needed a 4m moss pole. Since it didn't exist, here we are…

Now, we have a system to assemble moss poles together and secure them to the wall. The design aims to be as flexible as possible (within the constraints of my home).

Printing Details:

• 1 or more links: Print flat with supports.

• 1 or more wall mounts: Print on the flat face; no support needed.

• Spacers: Print as many as required. Each spacer is 1 cm high; print flat without support.

Hardware:

• Multiple MOSS POLES!

• Screws for the wall mounts.

• Zip ties to secure the poles to the wall mounts (see pictures).

• BBQ spikes to connect the moss poles together.

Assembly Instructions:

Links:

• Print all pieces.

• Insert BBQ spikes into the link pieces.

• Add spacers if needed.

• Force-fit the moss pole onto the links, but remember to cut your moss pole to the desired size first (see picture).

• Insert the BBQ spikes into the moss pole below (see picture).

Wall Mount:

• Install the wall mounts onto the wall.

• Optionally, wrap some coco fiber around before securing.

• Use zip ties to attach your Moss Pole Skyscraper to the wall mounts through the provided inserts.

Hope this helps!