6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums with accesssories

I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements

Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws.

This was modeled in Fusion 360.

I have included three sizes (6",8", and 10") they all use the same size screw (10-32 x 1-½")

I would recommend pre-threading the screws before putting the head on. And when tuning be sure to work in a star pattern to evenly tension the rim.

Drum heads were ordered from Sweetwater.  I'm thinking about getting a set of mesh heads for silent practice.

Accessories so far include…

     -Snare Attachment for 6 in drum

     -Cymbal Attachment for 8 in drum

      -Tri-Tom holder for Three 6in drums

      -Tri-Tom holder for 6, 8, and 10 in drums

Here is a link for TPU drumheads https://www.printables.com/model/1216377-tpu-drum-head-or-frisbee

Please feel free to suggest any other changes or options you would like to see!!!

Here are my basic settings.

Filament: Hatchbox Carbon-fiber PLA (currently sold out)

I printed my 6" drum using Sunlu Carbon-fiber PLA (Similar Quality)

I also printed a test shell in regular PLA and it feels just as strong as the Carbon-fiber.

Layer Height: 0.28mm

Perimeters: 4

Infill: 10%

No Raft or Brims

Sliced with Pursa Slicer

Printed on Creality CR-10 on a Glass Bed

The accessories are printed with the same settings but with regular PLA.

Update 7/20/23

I have added 12-inch 13-inch and 14-inch drums.  

I have also added a Marching Tenors Assembly accessory. This allows you to connect 5 drums in a Marching Tenor configuration.  (6in, 8in, 10in, 12in, 13in.)  I don't have a printer to print the larger drums but maybe someone out there can test this for me while I save up and purchase a larger printer?

Below is a rendering of the assembled parts the bars will need to be glued into the connection pieces.  Then the drums should fit in the slots.