Creality CR-10 - Voron Stealthburner Adapter

These files will allow for the addition of a Voron Stealthburner to the CR-10 Platform.  This is not a conversion to a Switchwire or anything of that ilk.  It's simply a means to adapt the current MGN12 mounted version of the Stealthburner to the CR-10 or equivalent printer.

Parts Needed:

1. MGN12 Linear Rail of suitable length
2. Replacement 2GT X-Axis Belt (2mm pitch, 6mm width)
3. 3D Printed Stealthburner Parts From Voron GITHUB. *

* Exept for the X-Carriage Parts

Build Notes:

• All files oriented for printing without supports.  StepperEndstopRetainer has a breakaway disposable support.
• You will need a new belt as the stock belt is a bit short.
• Remove and reattach the X-Endstop as depicted in the photo.
• IMPORTANT — The Omron TL-Q5MC1 probe used in the Stealthburner is not sensitive enough to work through the glass build plate supplied with the CR-10.  You must use a Spring Steel removable build plate with this probe.