Pan Tilt Compact Explorer

UPDATE: Added BaseV2.0 and TiltV2.0, this is for mount the tiltservo on to the bottom on the tilt-plate and connect the servo-rod to the baseplate. Also cutted of the extra edges on the base sticking out. V2 base and V1 (final) tilt still works together if you want to mount your tiltservo on to the base and dont want to have the extra edges sticking out.
END OF UPDATE.

Created a compact pan/tilt for FPV designed to fit a mini 600tvl camera and a runcam or mobius. (See video below, tilt function redesigned to work better, not included in video, just moved the hole on the plate)

2x M5x20 screws (16mm long threadings) with locknuts
2x ballbearings (see link below)
some washers
1x 9g servo (for tilt)
1x 45g servo (for pan, use link below)
wire to connect tilt servo to tilt plate.

600tvl camera:
http://www.banggood.com/600TVL-8\_0MP-14-2\_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html

Ball bearings:
http://www.ebay.com/itm/290948093007?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Pan servo:
http://www.ebay.com/itm/360784883026?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Use a washer between the ball bearings and the base to get it smooth.
screw the base to the servo, than glue the 9g tilt servo in between the "legs" on the base or use doubble sided tape. Enjoy.

Print instructions

Category: R/C Vehicles Summary

UPDATE: Added BaseV2.0 and TiltV2.0, this is for mount the tiltservo on to the bottom on the tilt-plate and connect the servo-rod to the baseplate. Also cutted of the extra edges on the base sticking out. V2 base and V1 (final) tilt still works together if you want to mount your tiltservo on to the base and dont want to have the extra edges sticking out.
END OF UPDATE.

Created a compact pan/tilt for FPV designed to fit a mini 600tvl camera and a runcam or mobius. (See video below, tilt function redesigned to work better, not included in video, just moved the hole on the plate)

2x M5x20 screws (16mm long threadings) with locknuts
2x ballbearings (see link below)
some washers
1x 9g servo (for tilt)
1x 45g servo (for pan, use link below)
wire to connect tilt servo to tilt plate.

600tvl camera:
http://www.banggood.com/600TVL-8\_0MP-14-2\_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html

Ball bearings:
http://www.ebay.com/itm/290948093007?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Pan servo:
http://www.ebay.com/itm/360784883026?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Use a washer between the ball bearings and the base to get it smooth.
screw the base to the servo, than glue the 9g tilt servo in between the "legs" on the base or use doubble sided tape. Enjoy.

Print Settings

Printer: Da Vinci 1.0A e3d v6 repetier

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 60%

Post-Printing