Station for model cable car (LGB)

This is a station for a model cable car (Modellseilbahn) Scale 1:32.
It has been designed to fit the KMS Modellseilbahn (http://modellseilbahnen.ch/5052.html)

The design has been inspired by the real life cable car station on the Weissenstein in Canton Solothurn, Switzerland. (The last drawing is of the real cable car station on the Weissenstein, picture is copied from the internet)

Of course you are completely free to use my designs non commercially, but if…. you want to support me buy me a coffee. (click on the red text)

Print Settings

Printer Brand: XYZprinting

Printer: da Vinci 1.0 Pro 3in1

Rafts: No

Supports: Yes

Resolution: 0.3 mm

Infill: 10%

Filament: Best Value ABS Snow White
Notes:

Place the objects with the "back side" on the bed to have less need for support. (It uses a lot of support material especially between the "curved rafts").

When you have a print bed large enough you can use the total model, otherwise you can print all eleven parts. They do print in a volume of 20 X 20 X 20 cm.

After printing, glue the parts together. For guidance you have some pins in the design.
These pins however also determine the order of glueing!

Post-Printing

After glueing you probably have to fill some gaps and paint the object to imitate Oak and Pine wood.

When you want to add some acrylic window imitation (Back and middle windows) you can use the drawing provided. It should be possible to print 1 to 1 on an A3 printer. You can then use the print as a template for cutting the acrylic's windows.

How I Designed This

I used Fusion 360, and information in the internet describing the real cable car station on the Weissenstein.

First I modelled the original design as good as possible with estimated dimensions.
Then I changed the design to make it a tight fit around the KMS model cable car.