Ikea Lack PTFE Filament Guide + PC4M10 holder

I needed to solve the problem of feeding the PTFE tubes from the top of the drybox, behind the printer on my Ikea Lack. First I printed the model by mariusvw from thingverse.com. There was a big complication with pulling the PTFE tube through the line. In addition, I needed to somehow attach the PC4M10 quick couplers. I made my own model where there is a hex passage for PTFE so that it does not get stuck + a PC4M10 holder that can be slid onto the first model (a prepared hole with a thread to secure it with an M3 screw) In the end, I removed some material, rather just for the sake of appearance.

Material: PETG

Layer: 0.2mm

Infill: 15-20%