IkeaLack stacker/riser

Description

You can screw the stackers to the legs of the upper table from below. Holes with a diameter of 4 mm are prepared.

The screw holes are countersunk by 32.5mm, so you can use shorter screws. 

The diameter of the holes for the screw head/screwdriver is 8.2mm and the end of these holes is at an angle of 118 deg

The hole for the table leg is 5x5cm

Stackers increase the space between tables by 4 cm

Printing

Material: PETG

Layer: 0.3mm

Infill: 15-20%