Desk hook slim

I created this hook to hang my backpack on the side of my chest of drawers which hasn't so much room under it. 

For safety I added 2 slots for two pieces of double-sided tape; for reference for the dimensions I used the 3M VHB tape but if you have a metal desk you can also put some magnets

In the top face, I added a slot made with the dimensions of the IKEA Bintje that I use to keep my keys 

I printed it standing with the tree supports enabled but if you have some problems with bridging I recommend changing to normal supports. For the best strength performance and speed, you could also print it laying down as it is in the second STL file.

Link for the Ikea Bintje: https://www.ikea.com/it/it/p/bintje-portavasi-galvanizzato-80334127/

I shared the IPT file so you can adjust it with the dimensions you need; I suggest not making the hook too big or the things you hang might fall

By CotoMaker