VAG Fuel Cap Latch (Audi VW Skoda Seat)

A replacement latch for the fuel/gas cap for VAG group cars, as with age the original rubber parts breaks easily. While the model by Sponge is good, the original system is better as it allows for easier rotation while screwing and unscrewing for refuelling. This is a replacement part for it. 

In case, you have lost the original ring to which it attaches, I have also created the model for it [LINK].

As the original system is held together with two pins, if you have lost them, you can always use a cut toothpick (see pictures). If you have the original pins, the holes on the print may need to be cleaned to fit properly.

Print settings:

• TPU/Flex filament;
• 15% infill;
• 0.1 Detail on Prusa Mini;
• Fiberlogy Fiberflex preset;
• I prefer 3 perimeters, but 2 will work fine.

Happy printing!