Bambulab X1-Carbon: Spacer for the glass lid, Abstandshalter für den Glasdeckel

Update: There was a bug with the file Fensterlift_hinten.stl, which was the wrong one and was replaced on 1.6.23. 

Spacer for X1-Carbon (also X1).  I did not want the disc to be placed only at an angle, because after all, such a fully packed AMS can weigh 5-6Kg.

To protect against dust, I have provided the openings between the holders with mesh. For this, 0.35mm narrow openings were let into each side.

The holders fit left and right and are with 10cm long enough, so that the AMS is not between the holders. In each holder there are recesses (0,6mm) for round rubber pads (10x1mm).

The parts fit wonderfully, but the files have errors - please just use the repair function of Bambu Slicer.

The material is PLA+, 0.2mm layer, 15% infill Straight, no support.

There are also holders without indentation. I intended these for printing with TPU, or PLA and another rubber support.