110 Film Development Reel (Jobo-fit)

There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version

I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film, specifically for the Jobo processing system, so I designed one specifically to fit Jobo systems. Specifically for the 15xx series tanks.

Obviously this is being offered here so that people can make one for themselves (if you do, please let me know!), but if you would like me to print one for you, I'd be happy to for a reasonable price. Just email me and we can hash out the details.

To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)

This was designed for use with the Jobo 15xx series tanks. It may work with others, but I haven't tested with anything other than the 15xx series.

Print instructions

Print Settings

Printer: MakerFarm Pegasus 10"

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20% overall with some 100% mesh modifiers in a couple places, for durability

Filament: Any PLA White

Notes:
I used a 2mm brim just as a precaution against edge curling.

Post-Printing

Nothing special for post-printing. Just basic removal of the brim (if used). Also, depending on your printer's tolerances, the center hole may be a perfect fit for the Jobo center core rod, or it may need some minor adjustments. All printers tolerances are slightly different in my experience.