Cable and USB-A Adapter for Sabrent M2 SSD Enclosure

This is a simple clip for attaching the USB-C to USB-C cable, and a generic USB 3.1 C-A adapter to a Sabrent M2 SSD enclosure (model EC-SNVE). The USB adapter used is a generic imported one with a 14mm x 6.66mm profile. Many of the commonly found ones in online stores are the same underlying unit, just with different branding. 

The tabs are fairly small, which makes them easy to snap off. I think the best option for printing this would be an ABS-like resin on an SLA or a PLA+ on an FDM printer, because of the added TPU making it a bit stronger when flexed. 

I suspect PETG may be okay. If using PLA, I would print it fairly slowly and hot to get the best layer adhesion possible, or consider printing it with supports at a 45 degree angle so the tabs are stronger. 

With a PLA+, I've had no issues.

This is made to adhere to the USB case with double-side permanent tape. I used a Scotch-brand permanent tape like you'd use in a scrapbook – strong and very thin. But anything fairly thin should be fine.