May 5, 2023
Description
This needs to be printed with ABS, ASA or possibly even PETG. PLA can't withstand the heat, I tested it to be sure.
The lamp shade is printed with 40% or 45% infill and the infill is Gyroid. The top, bottom and walls are zero thickness.
You will need an LED strip lighting kit, 2 heat set inserts and M3 screws that are long enough to hold the controller cable. Most likely m3x6 or m3x8.
This video and video description has more details:
License:
Creative Commons — Public Domain
Kapman's Workshop
