Silica Box | Silica Gel Container | Fits Standard Spool

This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool.
The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven.
Holds over 100g of silica gel!

IMPORTANT!
To create the grid, the following perimeters must be set:

• Vertical shells -> 6 perimeters
• Solid layers Top and Bottom -> 0
• Infillpattern -> Grid
• Infill -> 30% or higher (30% = 2,5x2,5mm grid)
• Print infill slowly to get all the squares connected