Quest Pro controller no silicon knuckle grip

For the use of the Quest pro wrist strap as knuckle grip on the fingers not the back of the hand. Glue it on with hotglue on the print so you dont scratch the controller. Use black hotglue if possible you wont see excess much. Or glue it with double sided tape which is hard to remove.

WARNING: Use it as own risk, hotglue may damage your controller. You can remove standard hotglue easily with isopropylic alcohol. Glue it on with hotglue on the print so you dont scratch the controller. 

WARNING Be aware that your controller drops if the connection fails between controller and 3d-print. 

Comes with the STEP as it’s the way to do. Always share your STEP files.

Edit: Tested with hotglue and it will not hold well. Using thin M3 VHB Tape now and seems to work fine. Time will tell.