HSW Ez-H Series Tool Holders - Honeycomb Storage Wall

Update 23/09/2023

• Added 2 sizes of holders for 30mm test cubes

Update 22/09/2023 pm

• 21 sizes of “Ez-H2 Cylinder” added - 10mm to 50mm in increments of 2mm

Update 22/09/2023

• Launch of the Ez-H system with 6 fittings
• To be added: a variety of sizes of generic holders based on feedback and base files for remixing

---------------

A new attachment standard for the popular Honeycomb Storage Wall.

• Easy to print - easy overhangs and no supports
• Single piece tool holders - no need for separate adapters
• Locking pin - extra security for heavier objects (optional)
• Print holders upright - layer orientation optimised

Print setting recommendations:

• Material: PLA, ABS, ASA (PETG will be a little less secure due to the reduced stiffness but should be workable with locking pins)
• 0.4mm nozzle, 0.25mm all layer heights
• 2 walls, 30% grid infill

Enjoy!

If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.