Big drybox clip (PANTRY 11L EAN 8694064003828)

About
Clips to keep lid closed for drybox from  PANTRY storage box 11L (EAN 8694064003828).
Box has dimensions for 2 standard 7cm filament spools.

Unfortunately the top edge is flat and it does not give edge to grasp the clip, so I had to apply thin film of hot glue so that the clip does not slips out.

Please give a like and post makes and provide comments for further improvements.

Print

PETG 0.20mm SPEED, no supports, 20% infill. You can print one instance with 5mm height to see if it fits.

Installation

• clean edges of the box with isopropyl, wait until it dries
• use hot thermo glue and make a 0.5mm thin layer for about 20mm in length
• wait until glue is cold
• slide in bottom part of the clip under the edge and then snap it over the top part. Another option is to install the clip and slide it sideways on to the glue.