Prusa Mini Angled Magnetic Sheet Holder 8° & 15°

This sheet holder is angled to help usage in narrow places, for example inside a metal printer enclosure or cabinet. Holds 3 sheets.

There are two versions: one is angled at 8° from the side and the other 15°.

Sheets can be slid in from the front or from above.

Building

Add as many Ø10 x 4 mm magnets as required. They can be pressed in one by one without glue on a flat surface by putting the magnet under the part and pressing the part downwards. Adding some thin self-adhesive soft (highly compressible) non-slip pads between the magnets makes it even better, and less magnets are required then.

Printing

Printed in PETG without supports. 0.20mm, 3 perimeters and 10% infill. Mirror it in the slicer for mounting on the other side of the enclosure.