SMA / RP-SMA connector Finger-Tightening Ring

For easy tightening and release of SMA / RP-SMA -connectors from R/C equipment.

Coupling torque values of 0.5 - 1.1 Nm are recommended by the connector manufacturers.

I recommend printing at least four of these at the time.

• even with ABS continuous cooling was needed to prevent deforming
• 0.1mm clearance might be too much for PLA prints so there's another file with zero clearance

UPDATE: With Basjohan's remix you can also make a customized version.

Print Settings

Rafts:

No

Supports:

Resolution:

0.1 - 0.25 mm layer height

Infill:

Notes:

Test printed with 0.25mm layer height, 0.4mm nozzle, 30% infill, PrimaABS.

Category: R/C Vehicles