September 15, 2023
Description
Created this simple wedge to utilize the holes in the sheet metal inside the Da Vinci Pro to hold a Logitech C270. This will probably work with all Da Vinci models, but I only have the pro.
Printer:
Da Vinci Pro
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
10%
Ran some 220 grit sand paper over the pin to get it smooth and have it fight nicely in the hole. Also used 3M permanent mounting squares on both sides of the wedge, as well as the face to secure the C270 Logitech camera.
Category: 3D Printer AccessoriesLicense:
Creative Commons — Public Domain
7
SupaFletch
