RMR Cover Plate - Texas Flag (for Agency Arms Irons Forward G19 RDS Mount))

WARNING: THIS IS NOT A STANDARD RMR COVER PLATE! 

It has been specifically designed to fit an Agency Arms Glock RMR Iron Forward RDS Mount from their AOS line. Pictured is a Gen4 Glock 19.

Some context: RMR covers on Thingiverse didn't fit my slide correctly since the Agency Arms plate is a bit wider than a G19 slide and they lacked front locating tabs. Dimensions are based on standard RMR mounting spec with slightly oversized holes, but the overall footprint is wider and shorter than a standard RMR cover plate to specifically fit flush with the AOS RMR mount. I put a Texas flag on the top because why not, but I've included a fusion360 file if yall want to edit that. Yes I know my modeling is a mess, but the job got done nonetheless.

I have gone to the range with this on and ran into no issues.

Note: 6-32 x 3/8 is a touch long since this is a pretty flat plate, use 1/4in or add 3mm washers to a 3/8 to mount.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Notes:

It's a little screw on plate that isn't load bearing... Use whatever settings you like it doesn't really matter.

Category: Sport & Outdoors