Rocky Paw Patrol Logo [Single Extruder, Multi color]

Hi

this model should be fairly easy to print. Can be glued to the wall or door of your kids room. If you like the model please leave a like and post an image! Thanks.

Idea:
The outer edge (and lettering) are raised +0.8mm while the recycling logo is only +0.4mm, allowing you to add 2 color-changes. You can also scale the model in X & Y but keep Z the same, allowing you to simply copy the following parameters.

Printing:
Layer height: 0.2mm
Color:
1) Start with green
2) Add color change at 2.2mm, switch to white
3) Add color change at 2.6mm, switch to grey/black/silver