Squash ball feet for reittec polished

Squash ball feet for reittec polisher. It acts as vibration dampers, which reduce noise and improve stability of the polisher.

Just insert standard squash ball in each foot (I used 1 white dot ball, but any other should work too), and secure the foot on the base using an M3 screw with a large washer (on mine, I used 2 washers per foot: a M3 and a M4).

Foot is provided in 3 variants :

• with a M3 heat-set insert (I used these: https://www.amazon.fr/gp/product/B07YSRGZ9N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
• with M3 screwed directly in the plastic
• with a M3 nut

On my polisher, I used heat-set insert versions.

The 2 other versions where not tested, but should work.

Print Settings

Printer:

Alfawise U20

Rafts:

Supports:

Yes

Resolution:

Infill:

40%

Notes:

Category: DIY