vchan3m's TS100 Soldering Iron Box for ⌀5x1.5mm magnet

Remix of the great vchan3m's TS100 Soldering Iron Box, modified to use ⌀5x1.5mm magnets.

I also add a footprint on the top of the box to store the simple flat clipping stand (with magnets to keep it in place).

It requires 7 ⌀5x1.5mm magnets. Only 3 if not using the flat stand footprint (which may works with 2 magnets instead of 4, but I'm not sure as there is a really small surface in contact with magnets).

Fusion 360 and STEP files included.

Print Settings

Printer:

RenRen3D Pro (Kossel XL)

Rafts:

Supports:

No

Resolution:

Infill:

25% line

Category: Electronics