Mavic Air harness

I needed a harness for my Mavic Air so I can deploy various payloads to it, so I designed one. It's fully printable, all-plastic and has a thick flat base so you can glue payloads to it.

It fits exactly on my printer, I have also glued a small silicone pad at the bottom to prevent the harness from moving at all, and now it's rock-solid.

It's hinged, print "Pin" for one of the hinges and glue or melt it in so it doesn't come out. Print "Cotter pin" for the second hinge so you can easily close and lock it without fear that the pin will come out by itself, but it's still very easy to open with your hands.

Let me know in the comments if you have any feedback!

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

Print the Top and Bottom pieces on their side. You need supports for the hinge holes, the pins don't.rnrnPrint the pins at 40% infill, the rest won't use infill so it doesn't matter.

Category: R/C Vehicles